Deunydd
Corff | Alwminiwm(5050 5052 5056 5154) | (AL Mg 1% -1.5%,2% -2.5%,3% -3.5%,5%) | ||
Gorffen | sgleinio | RAL Lliw Paentio | ||
Mandrel | Alwminiwm | Dur ● | Dur Di-staen | |
Gorffen | sgleinio | Sinc Plated ● | sgleinio | |
Math Pen | Cromen, CSK, fflans fawr |
Manyleb
D1 NOM. | RHIF DRILL.&MAINT Y TWLL | CELF.CÔD | YSTOD GRIP | L (MAX) | D NOM. | K MAX | P MIN. | Cneifio LBS | TENSILE LBS | ||
INCH | MM | INCH | MM | ||||||||
3/32" 2.44mm | #41 2.5-2.6 | 1-AS32 | 0.020-0.125 | 0.5-3.2 | 0.250 | 6.4 | 0. 188" 4.8 | 0. 032" 0.81 | 1.00" 25.4 | 70 310N | 80 360N |
1-AS34 | 0.126-0.250 | 3.2-6.4 | 0. 375 | 9.5 | |||||||
1-AS36 | 0.252-0.375 | 6.4-9.5 | 0.500 | 12.7 | |||||||
1/8" 3.21mm | #30 3.3-3.4 | 1-AS41 | 0.020-0.062 | 0.5-1.6 | 0.212 | 5.4 | 0. 250" 6.4 | 0. 040" 1.02 | 1.06" 27 | 120 630N | 150 670N |
1-AS42 | 0.063-0.125 | 1.6-3.2 | 0.275 | 7.0 | |||||||
1-AS43 | 0.126-0.187 | 3.2-4.8 | 0. 337 | 8.6 | |||||||
1-AS44 | 0.188-0.250 | 4.8-6.4 | 0.400 | 10.2 | |||||||
1-AS45 | 0.252-0.312 | 6.4-7.9 | 0. 462 | 11.7 | |||||||
1-AS46 | 0.313-0.375 | 7.9-9.5 | 0.525 | 13.3 | |||||||
1-AS48 | 0.376-0.500 | 9.5-12.7 | 0.650 | 16.5 | |||||||
1-AS410 | 0.502-0.625 | 12.7-15.9 | 0.755 | 19.7 | |||||||
5/32" 4.0mm | #20 4.2-4.2 | 1-AS52 | 0.020-0.125 | 0.5-3.2 | 0.300 | 7.6 | 0. 312" 7.9 | 0. 050" 1.27 | 1.06" 27 | 190 850N | 230 1020N |
1-AS53 | 0.126-0.187 | 3.2-4.8 | 0. 362 | 9.2 | |||||||
1-AS54 | 0.188-0.250 | 4.8-6.4 | 0. 425 | 10.8 | |||||||
1-AS56 | 0.252-0.375 | 6.4-9.5 | 0.550 | 14.0 | |||||||
1-AS58 | 0.376-0.500 | 9.5-12.7 | 0.675 | 17.1 | |||||||
1-AS510 | 0.502-0.625 | 12.7-15.9 | 0.800 | 20.3 | |||||||
1-AS516 | 0.876-1.000 | 22.2-25.4 | 1.175 | 29.8 | |||||||
3/16" 4.8mm | #11 4.9-5.0 | 1-AS62 | 0.020-0.125 | 0.5-3.2 | 0. 325 | 8.3 | 0. 375" 9.5 | 0. 060" 1.52 | 1.06" 27 | 260 1160N | 320 1430N |
1-AS63 | 0.126-0.187 | 3.2-4.8 | 0.387 | 9.8 | |||||||
1-AS64 | 0.188-0.250 | 4.8-6.4 | 0. 450 | 11.4 | |||||||
1-AS66 | 0.252-0.375 | 6.4-9.5 | 0. 575 | 14.6 | |||||||
1-AS68 | 0.376-0.500 | 9.5-12.7 | 0.700 | 17.8 | |||||||
1-AS610 | 0.502-0.625 | 12.7-15.9 | 0.825 | 21.0 | |||||||
1-AS612 | 0.626-0.750 | 15.9-19.1 | 0.950 | 24.1 | |||||||
1-AS614 | 0.752-0.875 | 19.2-22.2 | 1.075 | 27.3 | |||||||
1-AS616 | 0.876-1.000 | 22.2-25.4 | 1.200 | 30.5 | |||||||
1-AS618 | 1.002-1.125 | 25.4-29.6 | 1.325 | 33.7 | |||||||
1-AS622 | 1.252-1.375 | 31.8-34-.9 | 1.575 | 40.0 | |||||||
1/4" 6.4mm | F 6.5-6.6 | 1-AS82 | 0.020-0.125 | 0.5-3.2 | 0. 375 | 9.5 | 0.500" 12.7 | 0. 080" 2.03 | 1.25" 32 | 460 2050N | 560 2500N |
1-AS84 | 0.126-0.250 | 3.2-6.4 | 0.500 | 12.7 | |||||||
1-AS86 | 0.252-0.375 | 6.4-9.5 | 0.625 | 15.9 | |||||||
1-AS88 | 0.376-0.500 | 9.5-12.7 | 0.750 | 19.1 | |||||||
1-AS810 | 0.502-0.625 | 12.7-15.9 | 0.875 | 22.2 | |||||||
1-AS812 | 0.626-0.750 | 15.9-19.1 | 1.000 | 25.4 | |||||||
1-AS814 | 0.752-0.875 | 19.2-22.2 | 1.125 | 28.6 | |||||||
1-AS816 | 0.876-1.000 | 22.2-25.4 | 1.250 | 31.8 | |||||||
1-AS818 | 1.001-1.125 | 25.4-28.6 | 1.375 | 34.9 |
Cais
Mae'r rhybed ddall math agored aloi magnesiwm -alwminiwm a gynhyrchir gan Handan wodecy co., Ltd yn fath newydd o gynnyrch cysylltiad metel.Mae gan y rhybedion dall math agored fanteision gweithrediad hawdd, rhybed rhagorol, ymddangosiad hardd, priodweddau ffisegol uchel.Dewis perffaith o riveting.Aluminum un ochr rhybedi pen agored nid yn unig yn hawdd i'w defnyddio, effeithlonrwydd uchel, sŵn isel, gall leihau dwysedd llafur a nodweddion eraill, ond hefyd tightness cysylltiadau.
Gellir rhannu rhybedion alwminiwm yn rhybed pen cromen, rhybedion cowntersunk a rhybed pen fflans mawr.Mae gan ein rhybed alwminiwm math agored ddall aml ddewis o ddeunydd fel corff rhybed alwminiwm gyda mandrel dur, corff rhybed alwminiwm gyda chorff alwminiwm, corff rhybed alwminiwm gyda mandrel dur di-staen. Ac mae gan y deunydd aloi alwminiwm amlddewis o alu mg 1.5% 2.5% 3.5% a 5%.
Rhybed wedi'i baentio â lliw RAL, Mae'n addas ar gyfer rhybedu rhannau cysylltu â'r un lliw.Mae'r arwyneb rhybed yn hardd ac yn gryf. Gallwn wneud rhybed paent lliw ar gais cwsmer, ar eich sampl neu rif cod RAL.
Gellir defnyddio rhybedion dall alwminiwm yn eang mewn amrywiol gerbydau, llongau, gweithgynhyrchu peiriannau, electroneg, offeryniaeth, peiriannau bwyd, offer meddygol, adeiladu, addurno a mannau cau eraill.
Awgrymiadau ar gyfer prynu rhybedion dall:
1. Dewiswch y deunydd rhybedion dall priodol: alwminiwm, dur, dur di-staen, copr, ac ati.
2. Wrth wirio'r rhybed dall, gellir mesur y maint canlynol: diamedr y rhybedi, hyd y mandrel rhybed, trwch pen y rhybed a diamedr y pen, cyfanswm hyd y mandrel, hyd amlygiad y mandrel , diamedr y mandrel.Mewn arolygiad gwirioneddol, gellir mesur cryfder ymestyn a chryfder cneifio'r cynnyrch hefyd.
3. Yr allwedd yw rhoi sylw i'r rhybed, a yw'r sefyllfa rhybedu wirioneddol yn berffaith.